900s on a lightweight?

General Landrover stuff, greenlane trips, shows, journeys, stories, etc.
malky.s.w
Low Range
Posts: 13
Joined: Mon Feb 04, 2013 9:04 pm

900s on a lightweight?

Postby malky.s.w » Fri Apr 28, 2017 8:35 pm

This is probably a very daft question, however - I have a set of deep dish FC rims on 900s on my IIA FC, but now have a spare set of FC rims also on 900s, does anyone know if these would fit a lightweight or if they would be too big, cause too much drag, wear, hit the body, look stupid etc? It is on prarabolics. Thanks

User avatar
22900013A
The 1-Ton Wonder
Posts: 2615
Joined: Sat Oct 20, 2012 9:22 am
Contact:

Re: 900s on a lightweight?

Postby 22900013A » Sat Apr 29, 2017 6:55 am

I have seen a lwt with a set on, so they do fit...somehow. I thought it looked a bit daft myself.
http://sebvehicles.blogspot.co.uk/
http://eblrs.org/
1966 IIA Swb 24125067C ex-SEB managers vehicle HMO968D
1969 IIA 1-Ton 22900013A ex-SEB NBK148G
1972 III 1-Ton 26600078A ex-SEB Cherrypicker VJT440L
1973 III 1-Ton 26600082B ex-SEB MRX287L

User avatar
Wheeledbeast
In overdrive
Posts: 1360
Joined: Mon Apr 15, 2013 1:41 pm

Re: 900s on a lightweight?

Postby Wheeledbeast » Mon May 01, 2017 8:22 am

I think it would look cool 8-) A bit like those portugise swimmers they made,but i think with the narrow axels the stering lock might suffer :?:

User avatar
22900013A
The 1-Ton Wonder
Posts: 2615
Joined: Sat Oct 20, 2012 9:22 am
Contact:

Re: 900s on a lightweight?

Postby 22900013A » Mon May 01, 2017 9:08 am

The wader vehicle didn't look so bad as it was already a jacked up 109"...
http://sebvehicles.blogspot.co.uk/
http://eblrs.org/
1966 IIA Swb 24125067C ex-SEB managers vehicle HMO968D
1969 IIA 1-Ton 22900013A ex-SEB NBK148G
1972 III 1-Ton 26600078A ex-SEB Cherrypicker VJT440L
1973 III 1-Ton 26600082B ex-SEB MRX287L

User avatar
fuckwit
In overdrive
Posts: 298
Joined: Sun Jun 30, 2013 10:29 pm

Re: 900s on a lightweight?

Postby fuckwit » Fri May 05, 2017 5:22 am

I have seen a lwt with a set on, so they do fit...somehow. I thought it looked a bit daft myself.
As a member of the self-appointed Taste-Police, I've not seen it, but it's too easy to lean towards the 'it's only missing it's coin-slot' look. And I reckon on a LWT it could just tip in the wrong direction. Yet...

Image

Not a LWT and these might not be 9.00s but this looks great. Subtleties to lift an S1 away from the now too predictable green lines of concours S1 you see at shows is a good thing. He's thought to shy away from one more sticker, and somehow it looks 'right'.
Along with the kinda' thing that's kept its 40-55 year old patina, this is a real LR.

User avatar
22900013A
The 1-Ton Wonder
Posts: 2615
Joined: Sat Oct 20, 2012 9:22 am
Contact:

Re: 900s on a lightweight?

Postby 22900013A » Fri May 05, 2017 6:14 am

Those are not 900x16s.

Do deep dish rims on normal Land-Rovers look cool? Yes they do. Sadly that fact alone has pushed the prices of them beyond the reach of many. 900x16 tyres though are not usually a good idea. They are expensive, have poor wear rates and are usually only available in a compromise pattern something equivalent to an all-terrain. Considering the massive range of good quality tyres available now in sizes like 235/85R16 I don't see why anyone would actually want 900x16s unless you have a 101, FC or 1-Ton and want to keep the "historic" appearance.
http://sebvehicles.blogspot.co.uk/
http://eblrs.org/
1966 IIA Swb 24125067C ex-SEB managers vehicle HMO968D
1969 IIA 1-Ton 22900013A ex-SEB NBK148G
1972 III 1-Ton 26600078A ex-SEB Cherrypicker VJT440L
1973 III 1-Ton 26600082B ex-SEB MRX287L

User avatar
fuckwit
In overdrive
Posts: 298
Joined: Sun Jun 30, 2013 10:29 pm

Re: 900s on a lightweight?

Postby fuckwit » Fri May 05, 2017 6:21 am

Wasn't sure what those were. Didn't look like 9.00s. However, the sad reality is, I am forced to agree with all of that. 9.00s can't be good. And I can't imagine you can be poor and go out to buy a decent S1 anymore either.

This started in anger about 6-7 years ago, with the classic car royalty of 60s Ferraris etc etc, and down the food-chain from there. And the genie won't go back in the bottle.

User avatar
22900013A
The 1-Ton Wonder
Posts: 2615
Joined: Sat Oct 20, 2012 9:22 am
Contact:

Re: 900s on a lightweight?

Postby 22900013A » Fri May 05, 2017 12:26 pm

To some degree I blame myself, nobody was talking about these rims (or even these vehicles) as recently as ten years ago or even less. Now, every half-serious Land Rover owner claims they want a 1-Ton (most of them don't really) but they sure do want these rims...
http://sebvehicles.blogspot.co.uk/
http://eblrs.org/
1966 IIA Swb 24125067C ex-SEB managers vehicle HMO968D
1969 IIA 1-Ton 22900013A ex-SEB NBK148G
1972 III 1-Ton 26600078A ex-SEB Cherrypicker VJT440L
1973 III 1-Ton 26600082B ex-SEB MRX287L

malky.s.w
Low Range
Posts: 13
Joined: Mon Feb 04, 2013 9:04 pm

Re: 900s on a lightweight?

Postby malky.s.w » Sat May 13, 2017 6:38 pm

Thanks for the replies, I think I'll put the rims on but not the 900s and keep it on 7.50s

LR88
Low Range
Posts: 11
Joined: Sat Jun 10, 2017 6:13 pm

Re: 900s on a lightweight?

Postby LR88 » Mon Jun 12, 2017 5:38 pm

foto.JPG
900's on a lightweight will fit. It's up to you to say if looks right.
Do make sure you upgrade your brakes to SIII 11" drums and vacuumbooster. You need a whole lot more stopping power due to a larger radius and more momentum in those big heavy tires.
1963 SIIa 88" with 'some' mods.


Who is online

Users browsing this forum: No registered users and 1 guest